Vege‑Polisher™ Water Recycling System
Our Water Recycling System removes vegetable matter, debris and dirt from Vege-Polisher™ waste water.
Wyma’s Water Recycling System removes vegetable matter, debris and dirt from Vege-Polisher™ waste water.
Waste water and debris are collected in the sloped catchment tray. There is a wedge wire screen at the lower end of the tray. Water falls through the screen into the tank below. Debris is caught on the screen and swept away by a rotating brush.
The tank is made up of two chambers. The first allows sediment to settle while clean water flows over a centre weir to the second chamber. Water is pumped from this chamber for reuse.
The system is available in various heights for seamless integration.
|Removes vegetable matter and debris and Vege-Polisher waste water||Reduces fresh water usage by up to 70 %.|
|A||Rotary brush||Removes debris from the filter screen.|
|B||Waste chute||Directs waste to a waste bin*.|
|C||Safety cover*||Restricts access to rotating brush.|
|D||Water level sensor**||Senses low water level and stops the pump so it doesn't overheat. This is replaced by the pressure transducer** when full electrics are purchased.|
|E||Dump valves: manual or automatic||Open valves to flush sediment from tank.
Automatic only: Can be set to automatically open at regular intervals.
Note: Knife valves or butterfly valves are available.
|F||Overflow weir||Allows excess water and floating debris to exit the settling chamber and not carry through to the pump chamber.|
|G||Pressure transducer**||Replaces the water level sensor** when full electrics are purchased. Sends information to the PLC to control dump valves, water fill level and pump level protection.|
|H||Settling chamber||Allows heavy debris to settle and not carry through to the pump chamber.|
|I||Adjustable feet||Easy, level installation. Height adjustable +-120mm.|
|J||Filter screen||Catches large debris so it does not drop into the tank.|